Pumping System

The Standard Cement Grouting Pumps is hand operated diaphragm pump, which is widely used for grouting small and medium cable ducts. With the movement of the diaphragm, the suction of fine cement grout is performed, wherein pressure is retained by two ball lock valves that are provided at inlet and outlet. The pump can develop pressure up to 4kg/cm2 (60 P S I) and discharges approximately 190 liters of neat cement grout per hour.

Features:

• Especially designed in hexagon brass non-return valve and strainer at the suction end to ensure non choking of the system.
• Easy to remove and clean.
• Maintenance free.
• Highly economical.

We manufacture and supply a wide range of High Pressure Cement Grout Pumps, which is used for medium and large sized pre-stressed concrete works. These hand operated diaphragm pumps are provided with air chamber that helps to develop pressure up to 10kgs/cm2 (140psi). This delivers 300 liters of neat grout per hour.

Features:

• Weight is 15kgs approx and is easy to carry along on scaffoldings or  limited movement areas
  
• Designed in molded brass valve and completely detachable on the suction end
• Cleaning very easy hence avoiding opening of pump body unit completely
• Recommended to use specially designed anchorage nozzle for optimum performance of grout pump

Metro MI-MCGP-1 Manual Cement Grout Pumps:

Product Description:

MI -MCGP-1 is manual operated piston pump designed to perform wide variety of applications for Pumping low viscosity material, slurries and especially for grouting cement mortars.
The pump is majorly used in construction and mining industry for injecting material into wide and medium size gap in beams, columns ,basement walls and flooring, lift shaft concrete wall fillup etc. In mining industry it is used to fill up micro concrete pillows where there is gap between structure and rock and for soil stabilization. It has application in chemical industry also to pump out chemical slurries

Features and Advantages:

• Robust and sturdy metal construction increases equipment life and resist from frequent breakdowns.
• Designed compact to work in confined areas in construction sites and mining shafts where transportation, operation and access is difficult.
• Can be mounted even on a scaffold platform at any height.
• Designed for easy operation ,and can be easily dismantled and repaired .
• Easy availability of spares parts.

Technical Specifications:

With  professional applicator views and requirement, we are engaged in offering and designing a wide range of Injection Pumps. Designed in tandem with the set industry standards, these are suitable for easy and fast injection of synthetic resin to the concrete structures. Compact in size, very powerful and operated by electronic drill machine this pump can develop pressure up to 4000 PSI. Furthermore, the pump maintains even & stable working pressure to provide uniform grout injection delivery into the concrete. Thus, even the small cracks are filled neatly throughout the line of grout injection area.

Some of the other highlighting features of the pump are given below:

• Light weight
• Easy to carry along even in basement or confined areas
• Being detachable it is easy to maintain and cleaning can be done conveniently
• Mid – size jobs can be performed daily with ease and reliability

We offer Injection Hand Pumps, which is manufactured using high grade stainless steel and alloy. These pumps work with only epoxy resin and polyurethane. Thus, the stainless steel body can inject P U, Epoxy, and neat cement slurry in to the concrete whereas single component alloy body is used only for P U and epoxy injections. Compact in size, user friendly and cost effective, these pumps find extensive application in numerous industries. The pump can generate pressure up to 100 bars (1500 PSI) which enables pumping epoxy resin and polyurethane very effectively as per the requirement.

Features:

• Mounted on a flexible folding stand making it suitable for small jobs in confined places
• Performing small– size jobs daily with ease and reliability
• Available with two versions single component alloy and Stainless steel body

Metro Industries offers India Mark II Deep Well Hand Pumps which are suitable for bore well installation with static water level up to 45 meters. The components installed above the ground are manufactured using quality tested steel section, so that the end product is strong and durable. Furthermore, as the structure of the pump body is hot-dipped galvanized, these are also corrosion resistant. The spout design of the pump helps to collect water in any type of vessel that is normally used.

Salient Features:

• Pre-greased, sealed ball bearings add to the ease of operation and elimination of greasing during use
• Pedestal design ensures the bore hole is sealed to prevent water source contamination
• Cylinder with highly polished brass liner ensures long life of nitrile rubber pump bucket
• The rubber parts in the cylinder are nontoxic and hence they cause no health hazards
• All internal parts of the cylinder are made of gun-metal to ensuring long life
• Can be easily adapted for shallow-well, wind mill and motorized operations with monitor modifications
• India mark II pump works on the positive displacement principle, hence the discharge remains constant irrespective of the depth of bore.

Manufactured  and supplied by a reputed company in india we offer an extensive range of Liquid Transfer Diaphragm Hand Pumps. These diaphragm hand pumps are low cost solution for non-continuous, medium capacity pumping of various categories of liquid without electricity. Manufactured in different material compositions, these pumps are suitable for various categories of liquids. The non- friction working parts and self priming features of the pump are the excellent advantages of this design concept that can even handle inflammable liquids.

Features:

• Very easy to operate and compact in design
• It can work on any stable surface even in confined areas
• Highly efficient and can handle almost all types of liquids

The Pumps are available in the following material:

• Cast Iron
• Polypropylene
• Polypropylene
• Stainless steel
• Alloy 20

Suitable For:

• Clear liquids
• Slurries
• Viscous liquids
• Abrasive liquids
• Latex
  
• Petroleum Products
  
• Oils
• Mud Waters
• Oils & Chemicals

Application:

• Agriculture industries
• Effluents
• Remote areas
• Sanitation
• Barrel/drum unloading
• Trash Mud Water
• Repacking
• Chemicals

Hydraulic Pressure Test Pumps being compact in size are used for quick and exact compression Leak test. This can be easily done for conducting leak test on pipe work systems, containers, plumbing, heating and oil installations. Besides, the pump is also useful for compressed air, steam, cooling, solar and sprinkler systems and for boiler and pressure vessel.

Features:

• Very compact and light in weight
• Dismantled for easy access
• Design of stand is such that it can work without any foundation on plane surfaces
• Important working parts are made of stainless steel for trouble-free operation and to obtain specific pressure
• All parts are easily replaceable
• The pump works both with water and oil